AU Ford Falcon - SPUD Project


Reading the Tickford Vehicle Engineering (TVE) Plates


Reading the Tickford Vehicle Engineering (TVE) Plates

Important Note

This page contains all collated information on the TVE plates, but contains no first-hand information on them. This is due to the primary vehicle used for this project not being fitted with any of the following:

As a result of this, information on this page is considered incomplete indefinitely.

Tickford Vehicle Engineering Plate

Some models of AU Falcon were modified by Tickford in some way. In these cases, an additional plate is riveted to the inside of the hood of the affected models, near the coolant overflow tank.

Tickford Plate Location

Where the TVE plate would be installed if present

List of Available Modifications

Below is a list of known Tickford-supplied modifications, based on multiple marketing brochures from the period.

As this information was pulled from multiple sources, accuracy cannot be guaranteed and information is likely incomplete. Every effort has been made to ensure as much accuracy as possible

Modification Plate Abbreviation Description / Notes
17x8 5 spoke alloy wheels (235/45R17 tires) 17" ALLOY WHEELS 5 spoke Tickford wheels, generally fitted to XR models. Popular due to simple design
Dual-Fuel LPG System Seperate Plate Fitted Only known way to get dual-fuel “from the factory”
Body styling kit with front and rear skirts, rocker mouldings and full wing spoiler BODYKIT Tickford-specific body kit, generally only used on the XR variants
Momo steering wheel MOMO STEERING WHEEL Includes both the colored Leather steering wheels and the wood-accented “Luxury” steering wheel
Momo steering wheel and Momo T-Bar shifter MOMO STEERING WHEEL & 'T'BAR Includes both the colored Leather steering wheels and the wood-accented “Luxury” steering wheel
Premium Brakes PREMIUM BRAKE PACKAGE Approx. 330mm diameter Brembo brake upgrade fitted to Series 2-3 AU Falcons. Different to the brakes fitted to the T-Series models, which have no plate abbreviation due to these models not having the Modification Plate
Sport Suspension unknown only present on plate if non-XR as Sport Suspension was standard on XR trim
Sunroof SUNROOF  
Tickford Authorized LPG System Seperate Plate Fitted  

Alternative Plates

Certain options and configurations had alternative plates, listed below:

Tickford Build Number Plate

T-Series models of the AU Falcon (TE50/TS50/TL50) did not appear to have Tickford option plates. Instead they were fitted with a Build number plate, which contains a build number vertically on the left side, and a Tickford “Winged T” logo, the Model number (TE50/TS50/TL50) and the VIN Number on the right side. The Tickford build number plate, if present, can be found in the same location as the TVE Plate.

Tickford Dual-Fuel LPG Option Plate

Another similar-but-different Tickford-issued Options Plate was the Factory Dual-Fuel LPG system. This system is remarkably rare and as such, so is the Option Plate. If fitted, the plate will be present on the passenger side of the engine bay, next to the Air Conditioner line, and should contain the following, in the following approximate layout:

V.I.N 6FPAAAJG_________
ENGINE No. JG_________ DATE 00/00/0000
TANK DATE 00/00/0000 WATER VOL. 00 LITRES
L.P.G SERIAL No. AU 0000

Tickford Dual-Fuel LPG Plate location

Where the Tickford Dual-Fuel LPG plate would be installed if present

Tickford Authorized LPG Plate

LPG system installed by an authorized workshop may have another Tickford branded plate installed, which has Tickford logos on the top, followed by information in the following layout:

THE LPG SYSTEM COMPLIES WITH ADR44/01 & AS1425-1989
INSTALLED BY LICENCED WORKSHOP No. AAA00000
V.I.N 6FPAAAJG_________
ENGINE No. JG_________ DATE 00/00/0000
L.P.G SERIAL No. XXX0000

Page printed from The AU Falcon SPUD Project, visit https://digi-ron.github.io/AU-Falcon-SPUD-Project/ for more!